Enclosure (1) to COMDTINST 5230.51
WORKSTATION ALLOWANCE LIST CRITERIA
1. ALLOWANCE LIST. To provide a functionally based allowance list for Coast Guard
workstation resources. ALL workstation resources (standard and non-standard) will be
identified in a unit's allowance list.
2. CUTTER ALLOWANCES. SHIPALTS specify the number of on-board workstations for
cutter classes. Changes to the allowance will be made through the normal SHIPALT process.
For other vessel requirements, paragraph 3.f of this enclosure applies. Authorized cutter
allowances are based on approved SHIPALTs. Some cutters are authorized to have specific
program generated or test equipment aboard in excess of the SHIPALT. A Quality Action Team
(QAT) will be chartered by the Chief of Staff during 1994 to determine current computing
requirements for each cutter class. Unit the QAT completes its work, the allowance for cutters
listed below is for information only and should not be used as a basis for reallocation or
procurement.
TYPE
CLUSTER
WORKSTATION
TOTAL
MASTERS
ALLOWANCE
ALLOWANCE
(1)
WHEC-378
2
25
27
(2)
WAGB-400
2
25
27
(3)
WMEC-270
2
19
21
(4)
WMEC-210
2
12
14
(5)
WMEC-213
2
8
10
(6)
WMEC-205
2
7
9
(7)
WMEC-230
2
6
8
(8)
WAGB-290
2
6
8
(9)
WMEC-180
2
5
7
(10)
WLB-180
2
7
9
(11)
WLM-157
2
4
6
(12)
WIX
2
3
5
(13)
WTGB
1
3
4
(14)
WLIC-160
1
2
3
(15)
WPB-110
1
2
3
3.
SHORE UNIT ALLOWANCES. The following allowances apply to shore units:
a.
Operations:
(1)
Operational Reporting: One workstation for aggregate AMVER/CASP. (G-N)
One workstation for aggregate SEER/SIMS/SARMIS/ATONIS. (G-0/G-N)
1
Previous Page
