Enclosure (1) to COMDTINST 5100.56
b.
Risk Management to Protect Personnel.
References: Safety and Environmental Health Manual, COMDTINST
M5100.47(series); Marine Safety Manual, COMDTINST M16000.6(series);
Implementation of the Benzene Occupational Exposure Standard, COMDTINST
6260.25.
Identify and enroll/disenroll occupationally
exposed personnel into the OMMP
1
Complete Hazardous Condition Notification Form
(CG-5802) for each identified serious hazard and
forward to the appropriate MLC(k) for entry into
the Safety and Health Hazard Abatement Data
System (SHHADS)
1
Identify hazard abatement options
1
Assist commands to implement appropriate
control strategy by:
1. Writing safe work procedures and protective requirements
1
2. Establishing design criteria for engineering
controls needed (i.e., ventilation, noise
controls, etc.)
1
3. Developing administrative control strategies
1
4. Establishing criteria for protective equipment
needed and assist command in implementation
1
5. Implementing hazard abatement tracking and
reporting requirements (abatement plans, etc.)
1
c.
Training/Education.
References: Safety and Environmental Health Manual, COMDTINST
M5100.47(series); Marine Safety Manual, COMDTINST M16000.6; Hazard
Communication for Workplace Materials, COMDTINST 6260.21A; Technical Guide:
Practices for Respiratory Protection, COMDTINST M6260.2B; District Response
Groups/District Response Advisory Teams, COMDTINST 16465.41.
Identify hazardous workplaces and people
at risk as described in Risk Identification
and Assessment above
1
Identify type and degree of hazard (e.g., chemical
type, noise radiation, heat stress, etc.)
1
2
Previous Page
