COMDTINST 4790.2B
testing process and displays for comparison the tested component and known
good characteristics resident in the database.
(b) 2M Electronic Repair Station consisting of various power and hand tools, a
microscope, and miscellaneous supplies and consumable materials required to
repair EAs.
(c) A "Piece Parts" Allowance Parts List (APL) containing frequently used repair
components.
(d) ESD Control consisting of safety equipment designed to protect EAs under test or
repair by discharging electrical potentials residing upon work surfaces and
technicians' skin.
c. Program Support. The Naval Undersea Warfare Center (NUWC), Field Engineering
Office, Norfolk Detachment, is the Navy's ISEA for the diagnostic portion of the
program. Naval Surface Warfare Center (NSWC), Crane Division is the ISEA for the
repair portion of the program.
(1) Coast Guard Training Center Yorktown trains Coast Guard personnel tasked with
utilizing the program. Training may also be available at various Navy, Marine Corps,
or Air Force training sites.
(2) A Coast Guard liaison at NUWC provides various services to ensure maximum
effectiveness and utilization of the diagnostic capabilities of the program are realized.
(3) A Coast Guard liaison at NSWC performs similar duties to those of the NUWC
Liaison concerned with the repair capabilities of the program.
(4) General program assistance may be available through various Navy Fleet Technical
Support Centers (FTSCs).
5. POLICY.
a. All designated shore units (currently selected Naval Engineering Support Units (NESU),
Electronic Support Units (ESU), Electronic Support Detachments (ESD), 378' WHECs,
and 270' WMECs, shall maintain fully outfitted and certified 2M/MTR workcenters.
b. 2M/MTR stations may be installed or certified at other units with the approval of
Commandant (G-SCE) and the appropriate chain-of-command.
c. The equipment shall be maintained in accordance with applicable planned maintenance
schedules and controlling documents. Each workcenter shall maintain current
certification in accordance with certification requirements. Each ISEA liaison shall
establish procedures for scheduling and monitoring certification.
4