Encl. (4) to COMDTINST 4105.4
Renew - Replace existing component with reparable or consumable
component.
Repair - Repair existing component.
Minor Maintenance - Repair/renewal action is the unit's responsibility and
funded by AFC30. (Cost threshold will vary with each cutter class.)
Major Maintenance - Repair/renewal action is directed by the MLC and
funded by AFC45. (Cost threshold will vary with each cutter class.)
Preserve - Remove corrosion & keep painted.
Clean - Removal of dirt, grease and oil.
Inspect - Inspect and determine condition so future maintenance action can
be planned.
Reseal - Recoat with sealer or recaulk as applicable.
Remove - Remove component from cutter for further maintenance action.
Test - Arrange for and conduct test of component or system.
Install - Install component on cutter.
Hydro - Hydrostatically test the component. Drain - Remove liquid from
system/component in preparation for further maintenance.
Overhaul - Conduct an overhaul of the component/system by replacing
worn/damaged sub-components.
Support - SCCB/SCB will continue to support the equipment or component
using existing CALMS/ERPAL documents. Stocking levels will remain
"demand-driven". This term can apply to both systems and components.
Previous Page
